Pure Appl. Chem., 1987, Vol. 59, No. 2, pp. 193-216
http://dx.doi.org/10.1351/pac198759020193
POLYMER DIVISION
COMMISSION ON POLYMER CHARACTERIZATION AND PROPERTIES
A collaborative study of the stability of extrusion, melt spinning and tubular film extrusion of some high-, low- and linear-low density polyethylene samples
CrossRef Cited-by Linking
- Mallet Benoit, Lamnawar Khalid, Maazouz Abderrahim: Improvement of blown film extrusion of poly(Lactic Acid): Structure-Processing-Properties relationships. Polym Eng Sci 2014, 54, 840. <http://dx.doi.org/10.1002/pen.23610>
- Garofalo Emilia, Fariello Maria Letizia, Di Maio Luciano, Incarnato Loredana: Effect of biaxial drawing on morphology and properties of copolyamide nanocomposites produced by film blowing. European Polymer Journal 2013, 49, 80. <http://dx.doi.org/10.1016/j.eurpolymj.2012.09.024>
- Kolarik Roman, Zatloukal Martin, Martyn Mike: The effect of polyolefin extensional rheology on non-isothermal film blowing process stability. International Journal of Heat and Mass Transfer 2013, 56, 694. <http://dx.doi.org/10.1016/j.ijheatmasstransfer.2012.09.025>
- Garofalo E., Incarnato L., Di Maio L.: Effect of short-chain branching on melt fracture behavior of metallocene and conventional poly(ethylene/α-olefin) copolymers. Polym Eng Sci 2012, 52, 1968. <http://dx.doi.org/10.1002/pen.23140>
- Kolarik Roman, Zatloukal Martin, Tzoganakis Costas: Stability analysis of non-isothermal film blowing process for non-Newtonian fluids using variational principles. Chem Eng Set 2012, 73, 439. <http://dx.doi.org/10.1016/j.ces.2012.01.029>
- Carneiro O. S., Covas J. A., Domingues C.: Bi-axially Oriented Blown Film Technology. Intern. Polymer Processing 2012, XXVII, 348. <http://dx.doi.org/10.3139/217.2538>
- Kulikov Oleg, Hornung Klaus, Wagner Manfred: Low viscous hydrophilic processing additives for extrusion of polyethylene at reduced temperatures. Polym Eng Sci 2010, 50, 1236. <http://dx.doi.org/10.1002/pen.21645>
- Tiang Jen Shueng, Dealy John M.: Evaluating the processability of film blowing resins. Polym Eng Sci 2009, 49, 2132. <http://dx.doi.org/10.1002/pen.21452>
- Zhang Z., Lafleur P.G.: Investigation of LDPE blown film instability induced by air cooling. Polym Eng Sci 2008, 48, 1504. <http://dx.doi.org/10.1002/pen.21112>
- Kim Jaewhan, Kim Dong Hak, Son Younggon: Abnormal Rheological Behavior of Linear Low Density Polyethylene Melts at High Shear Rate . Polym Bull 2008, 60, 821. <http://dx.doi.org/10.1007/s00289-008-0907-9>
- Coventry K. D., Mackley M. R.: Cross-slot extensional flow birefringence observations of polymer melts using a multi-pass rheometer. J Rheol 2008, 52, 401. <http://dx.doi.org/10.1122/1.2836671>
- Zatloukal Martin, Vlček Jiří: Application of variational principles in modeling of the film blowing process for high stalk bubbles. J Non-Newton Fluid Mech 2006, 133, 63. <http://dx.doi.org/10.1016/j.jnnfm.2005.11.004>
- Doufas Antonios K.: Analysis of the rheotens experiment with viscoelastic constitutive equations for probing extensional rheology of polymer melts. J Rheol 2006, 50, 749. <http://dx.doi.org/10.1122/1.2243338>
- Ye Zhibin, AlObaidi Fahad, Zhu Shiping, Subramanian Ramesh: Long-Chain Branching and Rheological Properties of Ethylene-1-Hexene Copolymers Synthesized from Ethylene Stock by Concurrent Tandem Catalysis. Macromol Chem Phys 2005, 206, 2096. <http://dx.doi.org/10.1002/macp.200500248>
- Münstedt Helmut, Steffl Thomas, Malmberg Anneli: Correlation between rheological behaviour in uniaxial elongation and film blowing properties of various polyethylenes. Rheol Acta 2005, 45, 14. <http://dx.doi.org/10.1007/s00397-005-0435-6>
- Kim Seungoh, Fang Yunli, Lafleur Pierre G., Carreau Pierre J.: Dynamics and criteria for bubble instabilities in a single layer film blowing extrusion. Polym Eng Sci 2004, 44, 283. <http://dx.doi.org/10.1002/pen.20027>
- Zatloukal Martin, Vlček Jiří: Modeling of the film blowing process by using variational principles. J Non-Newton Fluid Mech 2004, 123, 201. <http://dx.doi.org/10.1016/j.jnnfm.2004.07.018>
- Choi Dongman, White James L.: Crystal structures and orientation development in tubular film extrusion of syndiotactic polypropylene and isotactic polypropylene. Polym Eng Sci 2001, 41, 1743. <http://dx.doi.org/10.1002/pen.10871>
- Muke S, Ivanov I, Kao N, Bhattacharya S.N: Extensional rheology of polypropylene melts from the Rheotens test. J Non-Newton Fluid Mech 2001, 101, 77. <http://dx.doi.org/10.1016/S0377-0257(01)00142-2>
- Micic Predrag, Bhattacharya Sati N: Rheology of LLDPE, LDPE and LLDPE/LDPE blends and its relevance to the film blowing process. Polym Int 2000, 49, 1580. <http://dx.doi.org/10.1002/1097-0126(200012)49:12<1580::AID-PI547>3.0.CO;2-Q>
- Cho H. H., Kim K. H., Ito H., Kikutani T.: Fine structure and physical properties of polyethylene fibers in high-speed spinning. II. Effect of catalyst systems in linear low-density polyethylene. J Appl Polym Sci 2000, 77, 1195. <http://dx.doi.org/10.1002/1097-4628(20000808)77:6<1195::AID-APP4>3.0.CO;2-Q>
- Micic P., Bhattacharya S. N.: Elongational behavior of polyethylene melts—effect of deformation. Polym Eng Sci 2000, 40, 1571. <http://dx.doi.org/10.1002/pen.11287>
- Muñoz-Escalona A., Lafuente P., Vega J. F., Santamaría A.: Rheology of metallocene-catalyzed monomodal and bimodal polyethylenes. Polym Eng Sci 1999, 39, 2292. <http://dx.doi.org/10.1002/pen.11617>
- Field Graham J, Micic Predrag, Bhattacharya Sati N: Melt strength and film bubble instability of LLDPE/LDPE blends. Polym Int 1999, 48, 461. <http://dx.doi.org/10.1002/(SICI)1097-0126(199906)48:6<461::AID-PI169>3.0.CO;2-7>
- Wagner M. H., Bernnat A., Schulze V.: The rheology of the rheotens test. J Rheol 1998, 42, 917. <http://dx.doi.org/10.1122/1.550907>
- Wagner Manfred H., Collignon Bertrand, Verbeke Jérôme: Rheotens-mastercurves and elongational viscosity of polymer melts. Rheol Acta 1996, 35, 117. <http://dx.doi.org/10.1007/BF00396038>
- Hamid S. Halim, Atiqullah Muhammad: Role of Blending Technology in Polyethylene Recycling. Journal of Macromolecular Science Part C Polymer Reviews 1995, 35, 495. <http://dx.doi.org/10.1080/15321799508014596>
- Piau J.M., El Kissi N.: Measurement and modelling of friction in polymer melts during macroscopic slip at the wall. J Non-Newton Fluid Mech 1994, 54, 121. <http://dx.doi.org/10.1016/0377-0257(94)80018-9>
- Rang Ho Jong, White James L.: A double bubble tubular film process to produce biaxially oriented poly(p-phenylene sulfide) (PPS) film. Polym Eng Sci 1990, 30, 1228. <http://dx.doi.org/10.1002/pen.760301907>
- Brzoskowski Ryszard, Montes Sergio A., White James L., Nakajima Nobuyuki: Investigations of the interaction of flowing rubber compounds with boundaries: Basic experiments and air lubricated die. J Non-Newton Fluid Mech 1989, 31, 43. <http://dx.doi.org/10.1016/0377-0257(89)80013-8>
- Hamid S. H., Qureshi F. S., Amin M. B., Maadhah A. G.: Weather-Induced Degradation of LLDPE: Calorimetric Analysis. Polymer-Plastics Technol Eng 1989, 28, 475. <http://dx.doi.org/10.1080/03602558908049808>