Pure and Applied Chemistry

CrossRef Cited-by Linking

• GHORUI S, DAS A K: Arc plasma devices: Evolving mechanical design from numerical simulation. Pramana - J Phys 2013, 80, 685. <http://dx.doi.org/10.1007/s12043-012-0491-2>
• Colombo V, Ghedini E, Gherardi M, Sanibondi P: Evaluation of precursor evaporation in Si nanoparticle synthesis by inductively coupled thermal plasmas. Plasma Sources Sci. Technol. 2013, 22, 035010. <http://dx.doi.org/10.1088/0963-0252/22/3/035010>
• Gao Yang, Yang De Ming, Gao Jianyi: Characteristics of a Plasma Torch Designed for Very Low Pressure Plasma Spraying. J Thermal Spray Technology 2012, 21, 740. <http://dx.doi.org/10.1007/s11666-011-9730-1>
• Zhan Qing, Yu Ligen, Ye Fuxing, Xue Qunji, Li Hua: Quantitative evaluation of the decarburization and microstructure evolution of WC–Co during plasma spraying. Surface and Coatings Technology 2012, 206, 4068. <http://dx.doi.org/10.1016/j.surfcoat.2012.03.091>
• Bellakhal N., Dachraoui M.: Electrochemical investigation of the oxides formed at the surface of brass (Cu–10Zn) by a humid-air plasma treatment. Material Chemistry and Physics 2003, 82, 484. <http://dx.doi.org/10.1016/S0254-0584(03)00275-X>
• Draou K, Bellakhal N, Cheron B.G, Brisset J.L: Plasma elaboration of barrier layers: a study of the oxides formed at the surface of brass (90Cu10Zn) by RF electric discharges in oxygen. Mat Res Bul 1998, 33, 1117. <http://dx.doi.org/10.1016/S0025-5408(98)00074-9>
• Chen Xi: J Phys D Appl Phys 1997, 30, 1885. <http://dx.doi.org/10.1088/0022-3727/30/13/009>
• Bellakhal N., Draou K., Cheron B.G., Brisset J.L.: Copper oxides formation by a low pressure RF oxygen plasma. Mater Sci & Eng B 1996, 41, 206. <http://dx.doi.org/10.1016/S0921-5107(96)01674-1>
• Rahmane Mohamed, Soucy Gervais, Boulos Maher I.: Mass transfer in induction plasma reactors. International Journal Heat Mass Transfer 1994, 37, 2035. <http://dx.doi.org/10.1016/0017-9310(94)90305-0>
• Pfender E.: Plasma jet behavior and modeling associated with the plasma spray process. This Solid Films 1994, 238, 228. <http://dx.doi.org/10.1016/0040-6090(94)90060-4>
• Li R., Boulos M.: Modeling of unsteady flow around accelerating sphere at moderate reynolds numbers. Can J Chem Eng 1993, 71, 737. <http://dx.doi.org/10.1002/cjce.5450710602>
• Kingswell R., Scott K. T., Wassell L. L.: Optimizing the vacuum plasma spray deposition of metal, ceramic, and cermet coatings using designed experiments. J Therm Spray Technol 1993, 2, 179. <http://dx.doi.org/10.1007/BF02652027>
• Xi Chen, Xin Tao: Heat transfer to a particle exposed to a rarefied plasma with a great temperature gradient. J of Therm Sci 1993, 2, 135. <http://dx.doi.org/10.1007/BF02718269>
• Fauchais P., Coudert J. F., Vardelle M., Vardelle A., Denoirjean A.: Diagnostics of thermal spraying plasma jets. J Therm Spray Technol 1992, 1, 117. <http://dx.doi.org/10.1007/BF02659011>
• Trapaga Gerardo, Szekely Julian: Mathematical modeling of the isothermal impingement of liquid droplets in spraying processes. Metall Trans B 1991, 22, 901. <http://dx.doi.org/10.1007/BF02651166>
• Kayali B., Suryanaranan R., Rodot M., Vardelle M., Vardelle A., Amri A.: Growth of silicon ribbons from powder using a plasma spray torch. This Solid Films 1991, 202, 359. <http://dx.doi.org/10.1016/0040-6090(91)90107-9>
• Fauchais P., Vardelle A., Vardelle M.: Modelling of plasma spraying of ceramic coatings at atmospheric pressure. J Ceram Int 1991, 17, 367. <http://dx.doi.org/10.1016/0272-8842(91)90035-X>
• Bronet Murray S., Boulos Maher I.: Particle slip velocities in air jets under atmospheric pressure and soft vacuum conditions. Can J Chem Eng 1990, 68, 353. <http://dx.doi.org/10.1002/cjce.5450680301>
• Wang H.P., Perry E.M., Lillquist R.D.: Intelligent Processing of Materials for Plasma Deposition. Mat Res Symp Proc 1990, 190, 3. <http://dx.doi.org/10.1557/PROC-190-3>
• Fauchais P., Vardelle M., Vardelle A., Coudert J. F.: Plasma spraying of ceramic particles in argon-hydrogen D.C. Plasma jets: Modeling and measurements of particles in flight correlation with thermophysical properties of sprayed layers. Metall Mater Trans B 1989, 20, 263. <http://dx.doi.org/10.1007/BF02825607>
• Fauchais P., Grimaud A., Vardelle A., Vardelle M.: La projection par plasma : une revue. Ann Phys Fr 1989, 14, 261. <http://dx.doi.org/10.1051/anphys:01989001403026100>
• Pfender E.: Fundamental studies associated with the plasma spray process. Surface Coatings and Technology 1988, 34, 1. <http://dx.doi.org/10.1016/0257-8972(88)90083-7>
• Rapakoulias D. E., Gerassimou D. E.: Simulation of energy transfer from a glow discharge to a solid surface. J Appl Phys 1987, 62, 402. <http://dx.doi.org/10.1063/1.339811>
• Goldstein R.J, Pfender E, Ibele W.E, Ramsey J.W, Simon T.W, Decker N.A, Kuehn T.H, Lee H.O, Girshick S.L, Eckert E.R.G: Heat transfer—a review of 1985 literature. International Journal Heat Mass Transfer 1986, 29, 1767. <http://dx.doi.org/10.1016/0017-9310(86)90002-5>