Pure Appl. Chem., 1975, Vol. 42, No. 4, pp. 551-612
http://dx.doi.org/10.1351/pac197542040551
WORKING PARTY ON STRUCTURE AND PROPERTIES OF COMMERCIAL POLYMERS OF THE MACROMOLECULAR DIVISION
Basic parameters, melt rheology, processing and end-use properties of three similar low density polyethylene samples
CrossRef Cited-by Linking
- Malkin A.Ya., Arinstein A., Kulichikhin V.G.: Polymer extension flows and instabilities. Progress in Polymer Science 2014. <http://dx.doi.org/10.1016/j.progpolymsci.2014.02.006>
- Klüver Enno, Meyer Michael: Preparation, processing, and rheology of thermoplastic collagen. J. Appl. Polym. Sci. 2013, 128, 4201. <http://dx.doi.org/10.1002/app.38644>
- Mitsoulis Evan, Hatzikiriakos Savvas G.: Capillary extrusion flow of a fluoropolymer melt. Int J Mater Form 2013, 6, 29. <http://dx.doi.org/10.1007/s12289-011-1062-7>
- Mitsoulis Evan, Malamataris Nikolaos A.: The free (open) boundary condition (FBC) in viscoelastic flow simulations. Int J Mater Form 2013, 6, 49. <http://dx.doi.org/10.1007/s12289-011-1071-6>
- Liu Gengxin, Sun Hao, Rangou Sofia, Ntetsikas Konstantinos, Avgeropoulos Apostolos, Wang Shi-Qing: Studying the origin of “strain hardening”: Basic difference between extension and shear. J. Rheol. 2013, 57, 89. <http://dx.doi.org/10.1122/1.4763568>
- Münstedt Helmut, Starý Zdeněk: Steady states in extensional flow of strain hardening polymer melts and the uncertainties of their determination. J. Rheol. 2013, 57, 1065. <http://dx.doi.org/10.1122/1.4803932>
- Mitsoulis Evan: 50 Years of the K-BKZ Constitutive Relation for Polymers. ISRN Polymer Science 2013, 2013, 1. <http://dx.doi.org/10.1155/2013/952379>
- Ansari Mahmoud, Zisis Thanasis, Hatzikiriakos Savvas G., Mitsoulis Evan: Capillary flow of low-density polyethylene. Polym Eng Sci 2012, 52, 649. <http://dx.doi.org/10.1002/pen.22130>
- Mitsoulis Evan, Malamataris Nikolaos A.: The free (open) boundary condition with integral constitutive equations. Journal of Non-Newtonian Fluid Mechanics 2012, 177-178, 97. <http://dx.doi.org/10.1016/j.jnnfm.2012.04.009>
- Ganvir Vivek, Gautham B.P., Pol Harshawardhan, Bhamla M. Saad, Sclesi Lino, Thaokar Rochish, Lele Ashish, Mackley Malcolm: Extrudate swell of linear and branched polyethylenes: ALE simulations and comparison with experiments. J Non-Newton Fluid Mech 2011, 166, 12. <http://dx.doi.org/10.1016/j.jnnfm.2010.10.001>
- Ansari Mahmoud, Hatzikiriakos Savvas G., Mitsoulis Evan: Slip effects in HDPE flows. J Non-Newton Fluid Mech 2011. <http://dx.doi.org/10.1016/j.jnnfm.2011.09.007>
- Mould S., Barbas J., Machado A.V., Nóbrega J.M., Covas J.A.: Measuring the rheological properties of polymer melts with on-line rotational rheometry. Polymer Testing 2011, 30, 602. <http://dx.doi.org/10.1016/j.polymertesting.2011.05.002>
- Wang Yangyang, Cheng Shiwang, Wang Shi-Qing: Basic characteristics of uniaxial extension rheology: Comparing monodisperse and bidisperse polymer melts. J Rheol 2011, 55, 1247. <http://dx.doi.org/10.1122/1.3626416>
- Baig Chunggi, Mavrantzas Vlasis G.: Tension thickening, molecular shape, and flow birefringence of an H-shaped polymer melt in steady shear and planar extension. J Chem Phys 2010, 132, 014904. <http://dx.doi.org/10.1063/1.3271831>
- Kalelkar Chirag, Lele Ashish, Kamble Samruddhi: Strain-rate frequency superposition in large-amplitude oscillatory shear. Phys Rev E 2010, 81, 031401. <http://dx.doi.org/10.1103/PhysRevE.81.031401>
- Monaco F. J., Delbem A. C. B., Federson F. M.: Genetic algorithm for the determination of linear viscoelastic relaxation spectrum from experimental data. J Appl Polym Sci 2009, 113, 122. <http://dx.doi.org/10.1002/app.29496>
- Ganvir Vivek, Lele Ashish, Thaokar Rochish, Gautham B.P.: Prediction of extrudate swell in polymer melt extrusion using an Arbitrary Lagrangian Eulerian (ALE) based finite element method. J Non-Newton Fluid Mech 2009, 156, 21. <http://dx.doi.org/10.1016/j.jnnfm.2008.06.006>
- Borg Tommi, Pääkkönen Esko J.: Linear viscoelastic models. J Non-Newton Fluid Mech 2009, 156, 129. <http://dx.doi.org/10.1016/j.jnnfm.2008.07.010>
- Borg Tommi, Pääkkönen Esko J.: Linear viscoelastic models. J Non-Newton Fluid Mech 2009, 156, 121. <http://dx.doi.org/10.1016/j.jnnfm.2008.07.011>
- Borg Tommi, Pääkkönen Esko J.: Linear viscoelastic models. J Non-Newton Fluid Mech 2009, 159, 17. <http://dx.doi.org/10.1016/j.jnnfm.2008.11.014>
- Mitsoulis E.: Effect of Viscoelasticity in Fountain Flow of Polyethylene Melts. IPP 2009, 24, 439. <http://dx.doi.org/10.3139/217.2295>
- Baird Donald G.: First normal stress difference measurements for polymer melts at high shear rates in a slit-die using hole and exit pressure data. J Non-Newton Fluid Mech 2008, 148, 13. <http://dx.doi.org/10.1016/j.jnnfm.2007.04.007>
- Wu Tingqi, Jiang Bo, Xu Shuhua, Huang Nabin: Three-dimensional nonisothermal simulation of a coat hanger die. J Appl Polym Sci 2006, 101, 2911. <http://dx.doi.org/10.1002/app.23368>
- Wu Tingqi, Jiang Bo, Xu Shuhua, Bi Chao: Nonisothermal comprehensive 3D analysis of polymer melt flow in a coat-hanger die. Polym Eng Sci 2006, 46, 406. <http://dx.doi.org/10.1002/pen.20419>
- Olley P., Wagner M.H.: A modification of the convective constraint release mechanism in the molecular stress function model giving enhanced vortex growth. J Non-Newton Fluid Mech 2006, 135, 68. <http://dx.doi.org/10.1016/j.jnnfm.2006.01.002>
- Huang Shu Xin, Lu Chuan Jing: Stress relaxation characteristics and extrudate swell of the IUPAC-LDPE melt. J Non-Newton Fluid Mech 2006, 136, 147. <http://dx.doi.org/10.1016/j.jnnfm.2006.03.013>
- Tsenoglou Christos J., Voyiatzis Evangelos, Gotsis Alexandros D.: Simple constitutive modelling of nonlinear viscoelasticity under general extension. J Non-Newton Fluid Mech 2006, 138, 33. <http://dx.doi.org/10.1016/j.jnnfm.2006.05.002>
- Stanescu P., Majesté J. C., Carrot C.: Modeling of the linear viscoelastic behavior of low-density polyethylene. J Polym Sci B Polym Phys 2005, 43, 1973. <http://dx.doi.org/10.1002/polb.20477>
- Olley P.: A study of the quadratic molecular stress function constitutive model in simulation. J Non-Newton Fluid Mech 2005, 125, 171. <http://dx.doi.org/10.1016/j.jnnfm.2004.11.005>
- Stadlbauer M., Janeschitz-Kriegl H., Lipp M., Eder G., Forstner R.: Extensional rheometer for creep flow at high tensile stress. Part I. Description and validation. J Rheol 2004, 48, 611. <http://dx.doi.org/10.1122/1.1718520>
- Robertson C. G., Roland C. M., Puskas J. E.: Nonlinear rheology of hyperbranched polyisobutylene. J Rheol 2002, 46, 307. <http://dx.doi.org/10.1122/1.1428318>
- Mitsoulis Evan: Numerical simulation of entry flow of the IUPAC-LDPE melt. J Non-Newton Fluid Mech 2001, 97, 13. <http://dx.doi.org/10.1016/S0377-0257(00)00183-X>
- Verbeeten Wilco M. H., Peters Gerrit W. M., Baaijens Frank P. T.: Differential constitutive equations for polymer melts: The extended Pom–Pom model. J Rheol 2001, 45, 823. <http://dx.doi.org/10.1122/1.1380426>
- Kajiwara Toshihisa, Tomiyama Hideki, Sueyoshi Yumi, Yamamura Masato, Adachi Kitaro: Numerical Simulation of Extrudate Swell Problem and Evaluation of Applicability of Viscoelastic Constitutive Models. 1. A Study on Axisymmetric Extrudate Swell from a Straight Die. J Soc Rheol Jpn 2001, 29, 47. <http://dx.doi.org/10.1678/rheology.29.47>
- Mitsoulis Evan, Beaulne Michel: Numerical simulation of rheological effects in fiber spinning. Adv Polym Technol 2000, 19, 155. <http://dx.doi.org/10.1002/1098-2329(200023)19:3<155::AID-ADV1>3.0.CO;2-B>
- Rubio P, Wagner M.H: LDPE melt rheology and the pom–pom model. J Non-Newton Fluid Mech 2000, 92, 245. <http://dx.doi.org/10.1016/S0377-0257(00)00094-X>
- Olley P: An adaptation of the separable KBKZ equation for comparable response in planar and axisymmetric flow. J Non-Newton Fluid Mech 2000, 95, 35. <http://dx.doi.org/10.1016/S0377-0257(00)00161-0>
- Blackwell R. J., McLeish T. C. B., Harlen O. G.: Molecular drag–strain coupling in branched polymer melts. J Rheol 2000, 44, 121. <http://dx.doi.org/10.1122/1.551081>
- MCLEISH T: Long Chain BranchingTheory and Experiments on Model Materials. Chem Eng Res Des 2000, 78, 12. <http://dx.doi.org/10.1205/026387600527031>
- YAMAGUCHI Masayuki, MIYATA Hiroshi: Strain Hardening Behavior in Elongational Viscosity for Binary Blends of Linear Polymer and Crosslinked Polymer. Polym J 2000, 32, 164. <http://dx.doi.org/10.1295/polymj.32.164>
- Maia J.M., Covas J.A., Nóbrega J.M., Dias T.F., Alves F.E.: Measuring uniaxial extensional viscosity using a modified rotational rheometer. J Non-Newton Fluid Mech 1999, 80, 183. <http://dx.doi.org/10.1016/S0377-0257(98)00086-X>
- Inkson N. J., McLeish T. C. B., Harlen O. G., Groves D. J.: Predicting low density polyethylene melt rheology in elongational and shear flows with “pom-pom” constitutive equations. J Rheol 1999, 43, 873. <http://dx.doi.org/10.1122/1.551036>
- Okamoto Masami, Kubo Hiroshi, Kotaka Tadao: Elongational flow-induced crystallization of poly(ethylene terephthalate) under the supercooled state. Poly 1998, 39, 3135. <http://dx.doi.org/10.1016/S0032-3861(97)10019-2>
- Kasehagen Leo J., Macosko Christopher W.: Nonlinear shear and extensional rheology of long-chain randomly branched polybutadiene. J Rheol 1998, 42, 1303. <http://dx.doi.org/10.1122/1.550892>
- Wagner M. H., Bernnat A., Schulze V.: The rheology of the rheotens test. J Rheol 1998, 42, 917. <http://dx.doi.org/10.1122/1.550907>
- Petrie C.J.S.: Three-dimensional presentation of extensional flow data. J Non-Newton Fluid Mech 1997, 70, 205. <http://dx.doi.org/10.1016/S0377-0257(96)01525-X>
- Fulchiron R, Revenu P, Kim B.S, Carrot C, Guillet J: Extrudate swell and isothermal melt spinning analysis of linear low density polyethylene using the Wagner constitutive equation. J Non-Newton Fluid Mech 1997, 69, 113. <http://dx.doi.org/10.1016/S0377-0257(96)01527-3>
- McLeish Tom CB: Polymer architecture influence on rheology. Current Opinion Solid State Mater Sci 1997, 2, 678. <http://dx.doi.org/10.1016/S1359-0286(97)80009-5>
- Sun Junsuo, Phan-Thien Nhan, Tanner Roger Ian: Extrudate swell through an orifice die. Rheol Acta 1996, 35, 1. <http://dx.doi.org/10.1007/BF00366548>
- Wagner M. H., �ttinger H. C.: Professor Dr. Joachim Meissner on the occasion of his retirement. Rheol Acta 1996, 35, 101. <http://dx.doi.org/10.1007/BF00396035>
- Lodge Arthur S.: On-line measurement of elasticity and viscosity in flowing polymeric liquids. Rheol Acta 1996, 35, 110. <http://dx.doi.org/10.1007/BF00396037>
- Wagner Manfred H., Collignon Bertrand, Verbeke Jérôme: Rheotens-mastercurves and elongational viscosity of polymer melts. Rheol Acta 1996, 35, 117. <http://dx.doi.org/10.1007/BF00396038>
- Barakos G., Mitsoulis E.: Non-isothermal viscoelastic simulations of extrusion through dies and prediction of the bending phenomenon. J Non-Newton Fluid Mech 1996, 62, 55. <http://dx.doi.org/10.1016/0377-0257(95)01385-7>
- Dunwoody J.: The effects of inertia and finite amplitude on oscillatory plane shear flow of K-BKZ fluids such as LDPE melts. J Non-Newton Fluid Mech 1996, 65, 195. <http://dx.doi.org/10.1016/0377-0257(96)01459-0>
- Yosick J.A., Giacomin A.J.: Can nonlinear deformation amplify subtle differences in linear viscoelasticity?. J Non-Newton Fluid Mech 1996, 66, 193. <http://dx.doi.org/10.1016/S0377-0257(96)01477-2>
- Barakos G, Mitsoulis E: A convergence study for the numerical simulation of the IUPAC-LDPE extrusion experiments. J Non-Newton Fluid Mech 1995, 58, 315. <http://dx.doi.org/10.1016/0377-0257(95)01359-4>
- Kajiwara T., Barakos G., Mitsoulis E.: Rheological Characterization of Polymer Solutions and Melts with an Integral Constitutive Equation. Int J of Polymer Analysis & Characterization 1995, 1, 201. <http://dx.doi.org/10.1080/10236669508233875>
- Bailey L. E., Cook D. G., Pronovost J., Rudin A.: Elongational flow properties of low-density polyethylene and linear low-density polyethylene from nonisothermal melt spinning experiments. Polym Eng Sci 1994, 34, 1485. <http://dx.doi.org/10.1002/pen.760341908>
- Meissner Joachim: Experimental problems and recent results in polymer melt rheometry. Makromolekulare Chemie Macromolecular Symposia 1992, 56, 25. <http://dx.doi.org/10.1002/masy.19920560105>
- Kaye A.: A constitutive equation for a non-Newtonian liquid. Rheol Acta 1992, 31, 3. <http://dx.doi.org/10.1007/BF00396462>
- Khan M. M. K., Tanner R. I.: Rheology of an LDPE melt in reversing multi-step shear and elongational flows. Rheol Acta 1990, 29, 281. <http://dx.doi.org/10.1007/BF01339884>
- Bush M.B.: A numerical study of extrudate swell in very dilute polymer solutions represented by the oldroyd-b model. J Non-Newton Fluid Mech 1990, 34, 15. <http://dx.doi.org/10.1016/0377-0257(90)80009-O>
- Ritzau G., Ram A., Izrailov L.: Effect of shear modification on the rheological behavior of two low-density polyethylene (LDPE) grades. Polym Eng Sci 1989, 29, 214. <http://dx.doi.org/10.1002/pen.760290403>
- Zhang K., Goddard J.D.: Inertial and elastic effects in circular-shear (ERD) flow of viscoelastic fluids. J Non-Newton Fluid Mech 1989, 33, 233. <http://dx.doi.org/10.1016/0377-0257(89)80001-1>
- Bush M.B.: Prediction of polymer melt extrudate swell using a differential constitutive model. J Non-Newton Fluid Mech 1989, 31, 179. <http://dx.doi.org/10.1016/0377-0257(89)80030-8>
- Luo X.-L., Tanner R. I.: Finite element simulation of long and short circular die extrusion experiments using integral models. Int J Numer Meth Engng 1988, 25, 9. <http://dx.doi.org/10.1002/nme.1620250104>
- Querejeta J. L., Santamaría A., Guzmán G. M.: Shrinkage effect on polyethylene based blends. Rheol Acta 1988, 27, 69. <http://dx.doi.org/10.1007/BF01372452>
- McLeish T. C. B: Hierarchical Relaxation in Tube Models of Branched Polymers. Europhys Lett 1988, 6, 511. <http://dx.doi.org/10.1209/0295-5075/6/6/007>
- Schlund B., Utracki L. A.: Linear low density polyethylenes and their blends: Part 3. Extensional flow of LLDPE's. Polym Eng Sci 1987, 27, 380. <http://dx.doi.org/10.1002/pen.760270511>
- Meissner Joachim: Polymer melt elongation—methods, results, and recent developments. Polym Eng Sci 1987, 27, 537. <http://dx.doi.org/10.1002/pen.760270802>
- Utracki L. A., Schlund B.: Linear low density polyethylenes and their blends: Part 4 shear flow of LLDPE blends with LLDPE and LDPE. Polym Eng Sci 1987, 27, 1512. <http://dx.doi.org/10.1002/pen.760272006>
- Laun H. M.: Orientation of macromolecules and elastic deformations in polymer melts. Influence of molecular structure on the reptation of molecules. Prog Colloid Polym Sci 1987, 75, 111. <http://dx.doi.org/10.1007/BF01188364>
- Luo X. -L., Tanner R. I.: A pseudo-time integral method for non-isothermal viscoelastic flows and its application to extrusion simulation. Rheol Acta 1987, 26, 499. <http://dx.doi.org/10.1007/BF01333733>
- Keunings R., Bousfield D.W.: Analysis of surface tension driven leveling in viscoelastic films. J Non-Newton Fluid Mech 1987, 22, 219. <http://dx.doi.org/10.1016/0377-0257(87)80037-X>
- Baird Donald G., Read M. D., Pike R. D.: Comparison of the hole pressure and exit pressure methods for measuring polymer melt normal stresses. Polym Eng Sci 1986, 26, 225. <http://dx.doi.org/10.1002/pen.760260307>
- Pucci M. S., Shroff R. N.: Correlation of blown film optical properties with resin properties. Polym Eng Sci 1986, 26, 569. <http://dx.doi.org/10.1002/pen.760260808>
- Bruker I.: Measurements of the first normal-stress difference in a new Rheo-dilatometer for molten polymers: Triple-step-shear-strain tests for all K-BKZ constitutive equations. Rheol Acta 1986, 25, 501. <http://dx.doi.org/10.1007/BF01774400>
- Luo X.-L., Tanner R.I.: A streamline element scheme for solving viscoelastic flowproblems part II: Integral constitutive models. J Non-Newton Fluid Mech 1986, 22, 61. <http://dx.doi.org/10.1016/0377-0257(86)80004-0>
- Minoshima Wataru, White James L.: A comparative experimental study of the isothermal shear and uniaxial elongational rheological properties of low density, high density and linear low density polyethylenes. J Non-Newton Fluid Mech 1986, 19, 251. <http://dx.doi.org/10.1016/0377-0257(86)80052-0>
- Santamaría A., Gallego F., Muñoz M. E.: Rheological and processing characteristics of polystyrene in the vicinity of Tll transition. Polym Eng Sci 1985, 25, 188. <http://dx.doi.org/10.1002/pen.760250308>
- Dijksman J. F., Savenije E. P. W.: The flow of Newtonian and non-Newtonian liquids through annular converging regions. Rheol Acta 1985, 24, 105. <http://dx.doi.org/10.1007/BF01333237>
- Santamaria A.: Influence of long chain branching in melt rheology and processing of low density polyethylene. Material Chemistry and Physics 1985, 12, 1. <http://dx.doi.org/10.1016/0254-0584(85)90033-1>
- Leblans P.J.R., Sampers J., Booij H.C.: Rheological properties of some polyolefine melts in transient uniaxial elongational flow, described with a special type of constitutive equation. J Non-Newton Fluid Mech 1985, 19, 185. <http://dx.doi.org/10.1016/0377-0257(85)85004-7>
- LODGE A. S.: LOW-SHEAR-RATE RHEOMETRY AND POLYMER QUALITY CONTROL. Chem Eng Com 1985, 32, 1. <http://dx.doi.org/10.1080/00986448508911641>
- Citroen S.L., Cogswell F.N.: Elastic recovery occurring in step-change tests. J Non-Newton Fluid Mech 1982, 10, 257. <http://dx.doi.org/10.1016/0377-0257(82)80004-9>
- Raible T., Stephenson S.E., Meissner J., Wagner M.H.: Constant force elongational flow of a low-density polyethylene melt—experiment and theory. J Non-Newton Fluid Mech 1982, 11, 239. <http://dx.doi.org/10.1016/0377-0257(82)80032-3>
- Magill J. H., Peddada S. V., Mcmanus G. M.: Crystallization—morphology—polymer processing correlations for IUPAC low density polyethylenes. Polym Eng Sci 1981, 21, 1. <http://dx.doi.org/10.1002/pen.760210102>
- Rhi-Sausi J., Dealy J. M.: A biaxial extensiometer for molten plastics. Polym Eng Sci 1981, 21, 227. <http://dx.doi.org/10.1002/pen.760210409>
- Laun H. M.: Zusammenhänge zwischen Orientierungsgrad (Doppelbrechung) und reversibler Deformation verstreckter Schmelzen und Berechnung dieser Größen aus dem Relaxationsspektrum ). Colloid Polymer Sci 1981, 259, 97. <http://dx.doi.org/10.1007/BF01384957>
- Fischer E.: Ein Modell zur Berechnung elastischer Deformationsanteile in einer LDPE-Schmelze nach der Durchströmung einer Kapillaren. Rheol Acta 1981, 20, 44. <http://dx.doi.org/10.1007/BF01517472>
- Illers K. H., Heckmann W.: Influence of mechanical history on the crystallization behaviour and morphology of low density polyethylene. Colloid Polymer Sci 1981, 259, 955. <http://dx.doi.org/10.1007/BF01558606>
- Münstedt H.: The influence of various deformation histories on elongational properties of low density polyethylene. Colloid Polymer Sci 1981, 259, 966. <http://dx.doi.org/10.1007/BF01558607>
- Tsang W.K.-W., Dealy J.M.: The use of large transient deformations to evaluate rheological models for molten polymers. J Non-Newton Fluid Mech 1981, 9, 203. <http://dx.doi.org/10.1016/0377-0257(81)85001-X>
- Murayama N.: A theoretical analysis of stress overshoot in uniaxial elongation of a LDPE melt. Colloid Polymer Sci 1980, 258, 1354. <http://dx.doi.org/10.1007/BF01668783>
- Carreau P. J., De Kee D.: Review of some useful rheological equations. Can J Chem Eng 1979, 57, 3. <http://dx.doi.org/10.1002/cjce.5450570102>
- Wagner M. H.: Zur Netzwerktheorie von Polymer-Schmelzen. Rheol Acta 1979, 18, 33. <http://dx.doi.org/10.1007/BF01515686>
- Wagner M. H.: Elongational behaviour of polymer melts in constant elongation-rate, constant tensile stress, and constant tensile force experiments. Rheol Acta 1979, 18, 681. <http://dx.doi.org/10.1007/BF01533342>
- Münstedt H., Laun H. M.: Elongational behaviour of a low density polyethylene melt. Rheol Acta 1979, 18, 492. <http://dx.doi.org/10.1007/BF01736955>
- Tanner R.I.: Some useful constitutive models with a kinematic slip hypothesis. J Non-Newton Fluid Mech 1979, 5, 103. <http://dx.doi.org/10.1016/0377-0257(79)85006-5>
- Dealy J.M.: Extensional Rheometers for molten polymers; a review. J Non-Newton Fluid Mech 1978, 4, 9. <http://dx.doi.org/10.1016/0377-0257(78)85003-4>
- Wagner M.H.: A constitutive analysis of uniaxial elongational flow data of low-density polyethylene melt. J Non-Newton Fluid Mech 1978, 4, 39. <http://dx.doi.org/10.1016/0377-0257(78)85005-8>
- Osaki Kunihiro, Kim Bong-Shik, Kurata Michio: Rheology of Copolymer Solutions. III. The Linear Viscoelasticity of SBS Block Copolymer Solutions. Polym J 1978, 10, 353. <http://dx.doi.org/10.1295/polymj.10.353>
- Dealy John M., Garcia-Rejón Andrés, Kamal Musa R.: Rheological comparison of three polyethylene film resins. Can J Chem Eng 1977, 55, 651. <http://dx.doi.org/10.1002/cjce.5450550604>
- van Krevelen D.W., Goedhart D.J., Hoftijzer P.J.: Correlations in the molecular weight distribution of polymers. Poly 1977, 18, 750. <http://dx.doi.org/10.1016/0032-3861(77)90249-X>
- Laun H. M., Münstedt H.: Comparison of the elongational behaviour of a polyethylene melt at constant stress and constant strain rate. Rheol Acta 1976, 15, 517. <http://dx.doi.org/10.1007/BF01515874>
- Gortemaker F. H., Hansen M. G., Cindio B., Janeschitz-Kriegl H.: A re-designed cone-and-plate apparatus for the measurement of the flow birefringence of polymer melts. Rheol Acta 1976, 15, 242. <http://dx.doi.org/10.1007/BF01521125>
- Gortemaker F. H., Hansen M. G., Cindio B., Laun H. M., Janeschitz-Kriegl H.: Flow birefringence of polymer melts: Application to the investigation of time dependent rheological properties. Rheol Acta 1976, 15, 256. <http://dx.doi.org/10.1007/BF01521126>